top of page
Micromold Logo Home Page

Home   //   Spacers & Flanges   // 

Breadcrumb Path && Item #

Please make sure this software is installed before downloading.

Downloading...  Please wait

Pipe - PTFE Schedule 80

Description:

Loading

Item Number:

Text

Description:

Loading

Request Info

Filler Flanges/Compensation Rings

Wall OD Min/Max:

Loading

Description:

Loading

Weight (lb/ft):

Loading

Item Number:

FFT-14

Nominal Pipe Size (inch):

Loading

Material:

Text

Length (inch):

Loading

Pipe OD Min/Max (inch):

Loading

Thickness (in):

Loading

Please Select Your CAD Format*

Request Info
Request Info

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Please click on a row to view an item number's full details/CAD model or click on the item number's "request info" button to get in touch with us.

Item #

col 2

col 3

col4 

col 5

col 6

col 7

Request Info

Loading

Loading

Loading

Loading

Loading

Loading

Please click on a row to view an item number's full details/CAD model or click on the item number's "request info" button to get in touch with us.

Item #

col 2

col 3

col4 

col 5

col 6

Request Info

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Please click on a row to view an item number's full details/CAD model or click on the item number's "request info" button to get in touch with us.

Item #

col 2

col 3

col4 

col 5

col 6

col 7

col 8

col 9

col 10

col 11

col 12

col 13

col 14

col 15

col 16

col 17

col 18

Select a thickness or enter a custom thickness 

Click image to open in expand mode.

Tooltip

Product Notes:​

    Standard Class 150 (150 lb.) PTFE Filler Flanges/Compensation Rings
    Filler Flanges, also known as Compensation Rings, are used to connect flanges with raised faces or sealing surfaces-especially those of plastic lined steel pipe-to flat faced plastic flanges. Without filler flanges, when the bolts are tightened on such a joint, the plastic flange will, most likely, break. The filler flange fills the gap that lies between the OD of the raised surface and the OD of the flange, flattening the face in contact with the plastic flange.
    BASE PART NUMBER: As shown here, the BASE PART NUMBER defines the Series (two characters), the material (one character), the nominal size, and the thickness TH. Use a decimal number to indicate the nominal size. For example, a 3/4” PTFE Filler Flange x 1/8” thick would be FFT-0.75-0.125
    NOTE: Other materials available, contact factory.

Click image to open in expand mode.

Tooltip

bottom of page