Micromold Introduces Installation Kit for PTFE Threaded Piping Systems
November 13, ’09, Yonkers, NY -- Micromold Products Inc. announces installation kits covering its entire line of FLUOR-O-FLO™ PTFE Schedule 80 NPT Threaded Piping Systems for the chemical, pharmaceutical and other process industries where these systems provide a lower cost alternative to traditional lined pipe solutions. Installation of Micromold’s FLUOR-O-FLO™ PTFE threaded piping system can now be done quickly and easily in the field, in about the same amount of time that powered threading tools take to thread steel.
Standard contractors’ powered threading tools are not recommended for PTFE piping. They cause leakage at the joint by distorting and tearing the relatively soft material. Our kits are available for each Schedule 80 pipe size in the range of ½” to 4”. Kits include an NPT Threading Tool, a Chamfering Tool and a tube of Formula 8 Paste as well as instructions and factory technical support.
In business since 1950, Micromold Products, Inc., www.micromold.com, manufactures a broad line of highly corrosion resistant fluid-flow equipment, including pipe, tube and fittings; valves; strainers; reaction and process vessel accessories such as nozzle liners and thermowells as well as flanged and Tri-Clamp dip pipes and spargers; tanks; and custom fabricated parts – emphasizing the fluoropolymers, PTFE, PVDF, PFA and FEP.
Contacts:
Engineering:
Claude Berman Engineering Manager
USA
Phone: 914-969-2850 ext 103
E-mail
Company Information:
Name: Micromold Products, Inc.
Address: 200 Corporate Blvd. S.
City: Yonkers
State: NY
ZIP: 10701
Country: USA
Phone: 914-969-2850
FAX: 914-969-2736
http://www.micromold.com
Standard contractors’ powered threading tools are not recommended for PTFE piping. They cause leakage at the joint by distorting and tearing the relatively soft material. Our kits are available for each Schedule 80 pipe size in the range of ½” to 4”. Kits include an NPT Threading Tool, a Chamfering Tool and a tube of Formula 8 Paste as well as instructions and factory technical support.
In business since 1950, Micromold Products, Inc., www.micromold.com, manufactures a broad line of highly corrosion resistant fluid-flow equipment, including pipe, tube and fittings; valves; strainers; reaction and process vessel accessories such as nozzle liners and thermowells as well as flanged and Tri-Clamp dip pipes and spargers; tanks; and custom fabricated parts – emphasizing the fluoropolymers, PTFE, PVDF, PFA and FEP.
Contacts:
Engineering:
Claude Berman Engineering Manager
USA
Phone: 914-969-2850 ext 103
Company Information:
Name: Micromold Products, Inc.
Address: 200 Corporate Blvd. S.
City: Yonkers
State: NY
ZIP: 10701
Country: USA
Phone: 914-969-2850
FAX: 914-969-2736
http://www.micromold.com